Tag Archives: gearboxes china

China Hot selling 1.5kw Servo Motor Planetary Gearboxes Wabseries Fubao gearbox definition

Product Description

Product Description

1.5kw Servo Motor Planetary Gearboxes WABseries FuBao

HangZhou Fubao Electromechanical Technology Co., Ltd.  servo motor planetary gearboxes
is a new generation of practical products independently developed by our company

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

servo motor planetary gearboxes characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the  servo motor planetary gearboxes . The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.

WAB series parameters Model number WAB042 WAB60 WAB090 WAB115 WAB140 WAB180 WAB220
Rated output torque 14-22 23-60 48-160 140-330 342-650 520-1200 1140-2000
Reduction ratio L1: 3, 4, 5, 6, 7, 8, 9, 10    L2: 15, 20, 25, 30, 35, 40, 50, 70, 80, 100
Planetary gear backlash L1: P0≤1 P1≤3 P2≤5   L2: P0≤3 P1≤5 P2≤7

 

Detailed Photos

 

Product Details

 

Other products

 

Product Advantages

Compared with other reduction machines, servo motor planetary gearboxes machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics, servo motor planetary gearboxes is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Company Profile

 

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.

Factory Display

 

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

 

Application: Motor, Machinery, Agricultural Machinery, Medical Robot
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

planetary gearbox

Impact of Gear Tooth Design and Profile on the Efficiency of Planetary Gearboxes

The design and profile of gear teeth have a significant impact on the efficiency of planetary gearboxes:

  • Tooth Profile: The tooth profile, such as involute, cycloid, or modified profiles, affects the contact pattern and load distribution between gear teeth. An optimized profile minimizes stress concentration and ensures smooth meshing, contributing to higher efficiency.
  • Tooth Shape: The shape of gear teeth influences the amount of sliding and rolling motion during meshing. Gear teeth designed for more rolling and less sliding motion reduce friction and wear, enhancing overall efficiency.
  • Pressure Angle: The pressure angle at which gear teeth engage affects the force distribution and efficiency. Larger pressure angles can lead to higher efficiency due to improved load sharing, but they may require more space.
  • Tooth Thickness and Width: Optimized tooth thickness and width contribute to distributing the load more evenly across the gear face. Proper sizing reduces stress and increases efficiency.
  • Backlash: Backlash, the gap between meshing gear teeth, impacts efficiency by causing vibrations and energy losses. Properly controlled backlash minimizes these effects and improves efficiency.
  • Tooth Surface Finish: Smoother tooth surfaces reduce friction and wear. Proper surface finish, achieved through grinding or honing, enhances efficiency by reducing energy losses due to friction.
  • Material Selection: The choice of gear material influences wear, heat generation, and overall efficiency. Materials with good wear resistance and low friction coefficients contribute to higher efficiency.
  • Profile Modification: Profile modifications, such as tip and root relief, optimize tooth contact and reduce interference. These modifications minimize friction and increase efficiency.

In summary, the design and profile of gear teeth play a crucial role in determining the efficiency of planetary gearboxes. Optimal tooth profiles, shapes, pressure angles, thicknesses, widths, surface finishes, and material selections all contribute to reducing friction, wear, and energy losses, resulting in improved overall efficiency.

planetary gearbox

Considerations for Selecting Size and Gear Materials in Planetary Gearboxes

Choosing the appropriate size and gear materials for a planetary gearbox is crucial for optimal performance and reliability. Here are the key considerations:

1. Load and Torque Requirements: Evaluate the anticipated load and torque that the gearbox will experience in the application. Select a gearbox size that can handle the maximum load without exceeding its capacity, ensuring reliable and durable operation.

2. Gear Ratio: Determine the required gear ratio to achieve the desired output speed and torque. Different gear ratios are achieved by varying the number of teeth on the gears. Select a gearbox with a suitable gear ratio for your application’s requirements.

3. Efficiency: Consider the efficiency of the gearbox, which is influenced by factors such as gear meshing, bearing losses, and lubrication. A higher efficiency gearbox minimizes energy losses and improves overall system performance.

4. Space Constraints: Evaluate the available space for installing the gearbox. Planetary gearboxes offer compact designs, but it’s essential to ensure that the selected size fits within the available area, especially in applications with limited space.

5. Material Selection: Choose suitable gear materials based on factors like load, speed, and operating conditions. High-quality materials, such as hardened steel or specialized alloys, enhance gear strength, durability, and resistance to wear and fatigue.

6. Lubrication: Proper lubrication is critical for reducing friction and wear in the gearbox. Consider the lubrication requirements of the selected gear materials and ensure the gearbox is designed for efficient lubricant distribution and maintenance.

7. Environmental Conditions: Assess the environmental conditions in which the gearbox will operate. Factors such as temperature, humidity, and exposure to contaminants can impact gear material performance. Choose materials that can withstand the operating environment.

8. Noise and Vibration: Gear material selection can influence noise and vibration levels. Some materials are more adept at dampening vibrations and reducing noise, which is essential for applications where quiet operation is crucial.

9. Cost: Consider the budget for the gearbox and balance the cost of materials, manufacturing, and performance requirements. While high-quality materials may increase initial costs, they can lead to longer gearbox lifespan and reduced maintenance expenses.

10. Manufacturer’s Recommendations: Consult with gearbox manufacturers or experts for guidance on selecting the appropriate size and gear materials. They can provide insights based on their experience and knowledge of various applications.

Ultimately, the proper selection of size and gear materials is vital for achieving reliable, efficient, and long-lasting performance in planetary gearboxes. Taking into account load, gear ratio, materials, lubrication, and other factors ensures the gearbox meets the specific needs of the application.

planetary gearbox

Common Applications and Industries of Planetary Gearboxes

Planetary gearboxes are widely utilized across various industries and applications due to their unique design and performance characteristics. Some common applications and industries where planetary gearboxes are commonly used include:

  • Automotive Industry: Planetary gearboxes are found in automatic transmissions, hybrid vehicle systems, and powertrains. They provide efficient torque conversion and variable gear ratios.
  • Robotics: Planetary gearboxes are used in robotic joints and manipulators, providing compact and high-torque solutions for precise movement.
  • Industrial Machinery: They are employed in conveyors, cranes, pumps, mixers, and various heavy-duty machinery where high torque and compact design are essential.
  • Aerospace: Aerospace applications include aircraft actuation systems, landing gear mechanisms, and satellite deployment mechanisms.
  • Material Handling: Planetary gearboxes are used in equipment like forklifts and pallet jacks to provide controlled movement and high lifting capabilities.
  • Renewable Energy: Wind turbines use planetary gearboxes to convert low-speed, high-torque rotational motion of the blades into higher-speed rotational motion for power generation.
  • Medical Devices: Planetary gearboxes find applications in medical imaging equipment, prosthetics, and surgical robots for precise and controlled motion.
  • Mining and Construction: Planetary gearboxes are used in heavy equipment like excavators, loaders, and bulldozers to handle heavy loads and provide controlled movement.
  • Marine Industry: They are employed in marine propulsion systems, winches, and steering mechanisms, benefiting from their compact design and high torque capabilities.

The versatility of planetary gearboxes makes them suitable for applications that require compact size, high torque density, and efficient power transmission. Their ability to handle varying torque loads, offer high gear ratios, and maintain consistent performance has led to their widespread adoption across numerous industries.

China Hot selling 1.5kw Servo Motor Planetary Gearboxes Wabseries Fubao   gearbox definition		China Hot selling 1.5kw Servo Motor Planetary Gearboxes Wabseries Fubao   gearbox definition
editor by CX 2023-12-12

China Standard Energy Saving Skm Series Helical Hypoid Gear Speed Reducer Transmission Gearbox cycloidal gearboxes

Product Description

1. Technical features

The high degree of modularity is a design feature of SKM, SKB series helical-hypoid gear units. It can be connected respectively with motors such as normal mtor, brake motor, explosion -proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, foodstuff, ceramice packing, logistics, plastics and so on.

1.1 Product characteristics

SKM SKB Seires helical gear units has more than 4 types. Power 0.12-4kw, Ratio 7.73-302.5, Torque max100-500 NM, Modulaw and multistructure can meet the demands of various conditions.

(1)Ground-hardened helical gears.
(2)Modularity, can be combined in many forms.
(3)Made of high-quality aluminum alloy, light in weight and nonrusting.
(4)Large in output torque, high efficiency, ene-rgy saving and environmental protection.
(5)The mounting dimension of SKM series are compatible with SMRV series worm gear unit(A part of SMRV050 dimensions are different from SKM28)
(6)The mounting dimension of SKB series are compatible with W series worm gear unit.

Function: Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

helical gearbox

The Basics of a Cyclone Gearbox

Besides being compact, cycloidal speed reducers also offer low backlash and high ratios. Because of the small size of the drive, they are ideal for applications where space is a problem.

Involute gear tooth profile

Almost all gears use an involute gear tooth profile. This profile has a single curve, which means that the gear teeth do not have to be aligned closely with each other. This profile is smooth and can be manufactured easily.
Cycloid gears have a combination of epicycloid and hypocycloid curves. This makes them stronger than involute gear teeth. However, they can be more expensive to manufacture. They also have larger reduction ratios. They transmit more power than involute gears. Cycloid gears can be found in clocks.
When designing a gear, you need to consider several factors. Some of these include the number of teeth, the tooth angle and the lubrication type. Having a gear tooth that is not perfectly aligned can result in transmission error, noise and vibration.
The tooth profile of an involute gear is usually considered the best. Because of this, it is used in a wide variety of gears. Some of the most common applications for this profile are power transmission gears. However, this profile is not the best for every application.
Cycloid gears require more complex manufacturing processes than involute gear teeth. This can cause a larger tooth cost. Cycloid gears are used for less noisy applications.
Cycloid gears also transmit more power than involute gears. This can cause problems if the radii change tangentially. However, the shape is more simple than involute gears. Involute gears can handle centre sifts better.
Cycloid gears are less susceptible to transmission error. Cycloid gears have a convex surface, which makes them stronger than involute teeth. Cycloid gears also have a larger reduction ratio than involute gears. Cycloid teeth do not interfere with the mating teeth. However, they have a smaller number of teeth than involute teeth.

Rotation on the inside of the reference pitch circle of the pins

Whether a cycloidal gearbox is designed for stationary or rotating applications, the fundamental law of gearing must be observed: The ratio of angular velocities must be constant. This requires the rotation on the inside of the reference pitch circle of the pins to be constant. This is achieved through a series of cycloidal teeth, which act like tiny levers to transmit motion.
A cycloidal disc has N lobes which are rotated by three lobes per rotation around N pins. The number of lobes on a cycloidal disc is a significant factor in determining the transmission ratio.
A cycloidal disc is driven by an eccentric input shaft which is mounted to an eccentric bearing within an output shaft. As the input shaft rotates, the cycloidal disc moves around the pins of the pin disc.
The drive pin rotates at a 40 deg angle while the cycloidal disc rotates on the inside of the reference pitch circle of pins. As the drive pin rotates, it will slow the output motion. This means that the output shaft will complete only three revolutions with the input shaft, as opposed to nine revolutions with the input shaft.
The number of teeth on a cycloidal disc must be small compared to the number of surrounding pins. The disc must also be constructed with an eccentric radius. This will determine the size of the hole which will be required for the pin to fit between the pins.
When the input shaft is turned, the cycloidal disc will rotate on the inside of the reference pitch circle of roller pins. This will then transmit motion to the output shaft. The output shaft is supported by two bearings in an output housing. This design has low wear and torsional stiffness.helical gearbox

Transmission ratio

Choosing the right transmission ratio of cycloidal gearbox isn’t always easy. You might need to know the size of your gearbox before you can make an educated choice. You may also need to refer to the product catalog for guidance. For example, CZPT gearboxes have some unique ratios.
A cycloidal gear reducer is a compact and high-speed torque transmission device that reverses the direction of angular movement of the follower shaft. It consists of an eccentric cam positioned inside a cycloidal disc. Pin rollers on the follower shaft fit into matching holes in the cycloidal disc. In the process, the pins slide around the holes, in response to wobbling motion. The cycloidal disc is also capable of engaging the internal teeth of a ring-gear housing.
A cycloidal gear reducer can be used in a wide variety of applications, including industrial automation, robotics and power transmissions on boats and cranes. A cycloidal gear reducer is ideally suited for heavy duty applications with large payloads. They require specialized manufacturing processes, and are often used in equipment with precise output and high efficiency.
The cycloidal gear reducer is a relatively simple structure, but it does require some special tools. Cycloid gear reducers are also used to transmit torque, which is one of the reasons they are so popular in automation. Using a cycloidal gear reducer is a good choice for applications that require higher efficiency and lower backlash. It is also a good choice for applications where size is a concern. Cycloid gears are also a good choice for applications where high speed and high torque are required.
The transmission ratio of cycloidal gearbox is probably the most important function of a gearbox. You need to know the size of your gearbox and the type of gears it contains in order to make the right choice.

Vibration reduction

Considering the unique dynamics of a cycloidal gearbox, vibration reduction measures are required for a smooth operation. These measures can also help with the detection of faults.
A cycloidal gearbox is a gearbox with an eccentric bearing that rotates the center of the gears. It shares torque load with five outer rollers at any given time. It can be applied in many applications. It is a relatively inexpensive asset. However, if it fails, it can have significant economic impacts.
A typical input/output gearbox consists of a ring plate and two cranks mounted on the input shaft. The ring plate rotates when the input shaft rotates. There are two bearings on the output shaft.
The ring plate is a major noise source because it is not balanced. The cycloidal gear also produces noise when it meshes with the ring plate. This noise is generated by structural resonance. Several studies have been performed to solve this problem.
However, there is not much documented work on the condition monitoring of cycloidal gearboxes. In this article, we will introduce modern techniques for vibration diagnostics.
A cycloidal gearbox with a reduced reduction ratio has higher induced stresses in the cycloidal disc. In this case, the size of the output hole is larger and more material is removed from the cycloidal disc. This increase in the disc’s stresses leads to higher vibration amplitudes.
The load distribution along the width of the gear is an important design criterion. Using different gear profiles can help to optimize the transmission of torque. The contact stress of the cycloidal disc can also be investigated.
To determine the amplitude of the noise, the frequency of the gear mesh is multiplied by the shaft rate. If the RPM is relatively stable, the frequency can be used as a measure of magnitude. However, this is only accurate at close to failure.helical gearbox

Comparison with planetary gearboxes

Several differences exist between cycloidal gearboxes and planetary gearboxes. They are related to gear geometry and manufacturing processes. Among them, there are:
– The output shaft of a cycloidal gearbox has a larger torque than the input shaft. The rotational speed of the output shaft is lower than the input shaft.
– The cycloid gear disc rotates at variable velocity, while the planetary gear has a fixed speed. Consequently, the cycloid disc and output flange transmission accuracy is lower than that of the planetary gears.
– The cycloidal gearbox has a larger gripping area than the planetary gear. This is an advantage of the cycloidal gearbox in that it can handle larger loads.
– The cycloid profile has a significant impact on the quality of contact meshing between the tooth surfaces. The width of the contact ellipses increases by 90%. This is a result of the elimination of undercuts of the lobes. In this way, the contact force on the cycloid disc is decreased significantly.
– The cycloid drive has lower backlash and high torsional stiffness. This allows a cycloidal drive to be more stable against shock loads. The cycloid drive is also a compact design, which is ideally suited for applications with large transmission ratios.
– The output hub of the cycloid gearbox has movable pins and rollers. These components are attached to the ring gear in the outer gearbox. The output shaft is also turned by the planet carrier. The output hub of the cycloid system is composed of two parts: the ring gear and the output flange.
– The input shaft of a cycloidal gearbox is connected to a servomotor. The input shaft is a cylindrical element that is fixed to the planet carrier.
China Standard Energy Saving Skm Series Helical Hypoid Gear Speed Reducer Transmission Gearbox   cycloidal gearboxesChina Standard Energy Saving Skm Series Helical Hypoid Gear Speed Reducer Transmission Gearbox   cycloidal gearboxes
editor by CX 2023-11-12

China wholesaler Transmission Gearbox Used DC Motor Prices Speed Reducer Worm Planetary Marine Bearing Tiller Buy Small Bevel CZPT Reverse Gearboxes with Great quality

Product Description

     Transmission Gearbox Used DC Motor Prices Speed Reducer Worm Planetary Marine Bearing Tiller  Buy Small Bevel CHINAMFG Reverse Gearboxes

What is DC Motor?

A DC motor is an electric motor that converts direct current electrical energy into mechanical energy. The most common types rely on the forces produced by induced magnetic fields due to flowing current in the coil. Nearly all types of DC motors have some internal mechanism, either electromechanical or electronic, to periodically change the direction of current in part of the motor.

DC motors were the first form of motors widely used, as they could be powered from existing direct-current lighting power distribution systems. A DC motor’s speed can be controlled over a wide range, using either a variable supply voltage or by changing the strength of current in its field windings. Small DC motors are used in tools, toys, and appliances. The universal motor, a lightweight brushed motor used for portable power tools and appliances can operate on direct current and alternating current.

Here are some of the advantages of using DC motors:

  • High efficiency. DC motors are very efficient, converting most of the electrical energy they receive into mechanical energy.
  • Wide speed range. DC motors can be operated over a wide range of speeds, making them ideal for various applications.
  • Easy to control. DC motors are relatively easy to control, making them ideal for use in automated systems.
  • Reliable. DC motors are very reliable and can withstand a lot of wear and tear.

Here are some of the disadvantages of using DC motors:

  • Can be expensive. DC motors can be more expensive than other types of motors, such as AC motors.
  • Require maintenance. DC motors require some maintenance, such as regular cleaning and lubrication.
  • Can be noisy. DC motors can be noisy, especially when they are operating at high speeds.

Overall, DC motors are a versatile and reliable type of motor that can be used in a variety of applications. They are characterized by their high efficiency, wide speed range, easy control, and reliability.

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Stepless
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

bevel gearbox

Distinguishing Bevel Gearboxes from Other Gear Systems

Bevel gearboxes stand out from other types of gear systems due to their unique characteristics and applications:

  • Angle of Intersection: Bevel gearboxes are designed to transmit motion between intersecting shafts at specific angles, making them ideal for changing the direction of rotational motion.
  • Direction Change: Unlike parallel shaft gear systems, bevel gearboxes change the direction of motion by 90 degrees or other specified angles, allowing them to efficiently transmit power around corners.
  • Compact and Space-Saving: Bevel gearboxes are often compact and space-saving, making them suitable for applications with limited room for gear assembly.
  • Wide Range of Angles: Bevel gearboxes can handle various angle configurations beyond 90 degrees, providing flexibility in designing complex mechanical systems.
  • Specialized Applications: Bevel gearboxes are commonly used in applications requiring changes in direction, such as automotive differential systems, steering mechanisms, printing presses, and machinery with intersecting axes.

These distinguishing features make bevel gearboxes a versatile choice for scenarios where changing the direction of rotational motion or transmitting power between intersecting shafts is essential.

bevel gearbox

Efficient Power Transmission and Torque Transfer with Bevel Gearboxes

Bevel gearboxes are designed to ensure efficient power transmission and torque transfer in various mechanical systems. Here’s how they contribute to these aspects:

  • Multiple Gear Teeth Engagement: Bevel gearboxes typically have multiple gear teeth in contact simultaneously, distributing the load across a larger surface area. This feature enhances torque-carrying capacity and minimizes wear, resulting in efficient torque transfer.
  • High Gear Ratio: Bevel gearboxes can achieve high gear ratios, allowing them to convert high-speed, low-torque input into low-speed, high-torque output. This capability is valuable for applications requiring precise control over rotational speed and force.
  • Smooth Motion Transfer: The meshing of bevel gears ensures smooth and continuous motion transfer between intersecting shafts. This is essential for maintaining consistent power transmission and reducing vibration or noise.
  • Optimized Gear Tooth Design: Bevel gear teeth are carefully engineered with specific profiles and angles to minimize friction and maximize contact area. This design optimization enhances the efficiency of torque transfer while reducing energy losses due to friction.
  • Precise Machining and Alignment: Precision machining and proper alignment of bevel gears within the gearbox contribute to efficient power transmission. Accurate gear meshing reduces the likelihood of backlash and ensures minimal energy wastage.

Bevel gearboxes are chosen for applications where efficient power transmission, precise torque transfer, and reliable motion control are essential requirements.

bevel gearbox

Significance of the Angle Between Bevel Gears in a Bevel Gearbox

The angle between bevel gears in a bevel gearbox plays a crucial role in determining how the rotational motion is transmitted between the intersecting shafts. This angle, often referred to as the “shaft angle” or “pitch angle,” has significant implications for the performance, efficiency, and load-bearing capacity of the gearbox.

The angle between bevel gears affects several key aspects:

  • Mechanical Advantage: The angle determines the mechanical advantage or gear ratio of the bevel gearbox. A smaller angle results in a lower gear ratio, providing higher torque and slower rotational speed, while a larger angle yields a higher gear ratio, resulting in higher rotational speed and lower torque output.
  • Efficiency: The angle affects the efficiency of power transmission. A smaller angle generally leads to higher efficiency due to improved load distribution and reduced friction losses.
  • Load Distribution: Properly chosen angles contribute to even load distribution across the teeth of the bevel gears. Improper angles can cause uneven wear and premature failure.
  • Space Constraints: The angle impacts the overall dimensions of the bevel gearbox, which can be critical when space is limited in certain applications.

The angle between bevel gears is typically selected based on the specific requirements of the mechanical system and the intended application. It is a critical design consideration that engineers carefully analyze to ensure optimal performance and reliability of the bevel gearbox.

China wholesaler Transmission Gearbox Used DC Motor Prices Speed Reducer Worm Planetary Marine Bearing Tiller Buy Small Bevel CZPT Reverse Gearboxes   with Great quality China wholesaler Transmission Gearbox Used DC Motor Prices Speed Reducer Worm Planetary Marine Bearing Tiller Buy Small Bevel CZPT Reverse Gearboxes   with Great quality
editor by CX 2023-10-24

China high quality High Stability Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers components of gearbox

Product Description

Product Description

high stability stainless steel agriculture bevel gearbox Planetary helical gearboxes reducers

HangZhou Fubao Electromechanical Technology Co., Ltd. bevel gearbox Planetary helical gearboxes Reducer is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

bevel gearbox Planetary helical gearboxes Reducer characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the bevel gearbox Planetary helical gearboxes Reducer. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.

Compared with other reduction machines, bevel gearbox Planetary helical gearboxes Reducer machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics,bevel gearbox Planetary helical gearboxes Reducer is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Product Parameters

 

WVB/WVBL series parameters Model number WVB042/WVBL50 WVB60/WVBL70 WVB/WVBL90 WVB/WVBL120 WVB142/WVBL155 WVB180/WVBL205 WVB220/WVBL235
Rated output torque 13-17Nm 32-48Nm 80-125Nm 165-265Nm 280-530Nm 480-960Nm 900-1360Nm
Reduction ratio L1: 3, 4, 5, 7, 10 L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100
Planetary gear backlash L1: P1≤3 P2≤5  L2: P1≤5 P2≤7

 

Detailed Photos

Product Details

Other products

 

Company Profile

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Application: Motor, Machinery, Agricultural Machinery, Semiconductor Manufacturing Equipment
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

helical gearbox

Types of Helical Gear Arrangements

Yes, there are different types of helical gear arrangements available to suit various applications and requirements. Some of the common helical gear arrangements include:

Parallel Shaft Arrangement: In this arrangement, the axes of the driving and driven shafts are parallel to each other. It is the most straightforward configuration and is often used in applications where space is not a constraint, and the gearboxes can be placed side by side.

Right-Angle Shaft Arrangement: In a right-angle arrangement, the driving and driven shafts are positioned at a 90-degree angle to each other. This arrangement is space-saving and is commonly used in applications where the layout requires a change in direction of the power transmission.

Double Helical Gear Arrangement (Herringbone Gears): Double helical gears consist of two sets of helical teeth facing each other. This arrangement helps to cancel out axial forces and reduces the net thrust load on bearings. It is often used in heavy-duty applications to minimize wear and vibration.

Crossed Helical Gear Arrangement (Screw Gears): In this configuration, the axes of the driving and driven shafts are neither parallel nor intersecting. It is suitable for applications requiring non-parallel and non-intersecting shafts.

The choice of helical gear arrangement depends on factors such as available space, power transmission requirements, and the desired layout of the machinery or equipment. Each arrangement has its advantages and disadvantages, and selecting the appropriate one is crucial for achieving optimal performance and efficiency.

helical gearbox

Safety Precautions for Operating Machinery with Helical Gear Systems

When operating machinery equipped with helical gear systems, it’s crucial to prioritize safety to prevent accidents and ensure the well-being of operators and equipment. Here are the key safety precautions to consider:

  • Training and Familiarity: Operators should receive proper training on the equipment’s operation, including the helical gear system. They should be familiar with the controls, emergency procedures, and potential hazards.
  • Protective Gear: Operators should wear appropriate personal protective equipment (PPE), such as gloves, safety glasses, helmets, and ear protection, depending on the application’s requirements.
  • Lockout/Tagout: Before performing maintenance or repairs, follow lockout/tagout procedures to isolate the machinery from its power source and prevent accidental startup.
  • Regular Inspections: Conduct routine inspections of the helical gear system and other machinery components to identify signs of wear, damage, or malfunction. Address any issues promptly to avoid unsafe conditions.
  • Proper Lubrication: Ensure the helical gear system is adequately lubricated according to manufacturer recommendations. Proper lubrication reduces friction, wear, and heat buildup, enhancing both performance and safety.
  • Emergency Stop: Machinery should be equipped with clearly marked emergency stop buttons or switches that operators can use to halt operations immediately in case of an emergency.
  • Cleaning and Housekeeping: Maintain a clean work environment by removing debris, oil spills, and other potential hazards. Good housekeeping minimizes slip and trip hazards and promotes safe operation.
  • Load Capacity: Adhere to the recommended load capacities specified by the manufacturer for both the helical gear system and the machinery as a whole. Overloading can lead to accelerated wear and potential failures.
  • Avoid Loose Clothing: Operators should avoid wearing loose clothing, jewelry, or other items that could become entangled in the machinery, leading to accidents.
  • Safe Working Distances: Establish safe working distances from moving parts of the machinery, including the helical gear system, to prevent accidental contact and ensure operator safety.
  • Regular Maintenance: Follow the manufacturer’s maintenance schedule and guidelines for the helical gear system. Regular maintenance reduces the risk of unexpected failures and promotes safe and reliable operation.

Prioritizing safety when operating machinery with helical gear systems is essential to prevent accidents, protect operators, and maintain efficient operations. Following these precautions and promoting a safety-conscious culture can significantly contribute to a safe working environment.

helical gearbox

Handling High Torque and Heavy Loads in Helical Gearboxes

Helical gearboxes are well-suited for handling high torque and heavy loads due to their unique design and meshing characteristics:

  • Helical Teeth: The helical shape of the gear teeth allows for gradual and continuous contact between the teeth during meshing. This results in smoother load distribution and reduced impact forces, making helical gears capable of handling heavy loads.
  • Multiple Tooth Contact: Helical gears have multiple teeth in contact at any given time, spreading the load over a larger area of gear teeth. This helps to distribute the load evenly and prevent localized wear and stress concentrations.
  • Increased Tooth Strength: The inclined orientation of helical gear teeth increases the tooth width, leading to greater tooth strength and improved load-carrying capacity.
  • Bearings and Shaft Design: The gearbox housing is designed to support heavy loads and provide proper alignment for the shafts and bearings. High-quality bearings and shafts help distribute the load and reduce wear.
  • Lubrication: Adequate lubrication is crucial to minimize friction and heat generation between gear teeth. Proper lubrication also helps to dissipate heat generated by the heavy loads.
  • Material Selection: High-strength materials with good wear resistance properties are chosen for helical gears to ensure they can withstand the demands of heavy loads.

Overall, the gradual engagement of helical gear teeth and their ability to handle multiple tooth contact positions them as a reliable choice for applications that require high torque and can handle heavy loads. Engineers carefully design helical gearboxes to ensure they can withstand the stresses imposed by the application’s specific requirements.

China high quality High Stability Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers   components of gearbox	China high quality High Stability Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers   components of gearbox
editor by CX 2023-10-17

China Standard Wheel Drives Planetary Reducer Gear Box Gearboxes for Self-Propelled Vehicles with Best Sales

Product Description

Wheel Drives Planetary Reducer Gear box gearboxes For Self-propelled Vehicles

Wheel Drives Superior Performance
The EP600L Series wheel drive planetary gearbox is designed for self-propelled vehicles with hydraulic or electric motors.
Available in a wide range of ratios, the gearbox allows the power system to operate at optimum efficiency. The EP600L planetary gear reducer for wheeled vehicle has the capacity to drive whatever the type of machine with up to 2.5m of tire diameter and 50 tons each wheel. Thanks to the wide ratio range, there is a solution for any type of transmission and application. The manual declutch system can disengage the gearhead from the motor for emergency towing.
Wheel Drives Key Features
1. Output torque range: 1000-60000 N.m
2. Gear ratios: i=5.3-142
3. Support: thegearbox has rotating housing flanges to fit wheel
4. Applicable motors: axial piston hydraulic motors, hydraulic orbit motors or others
5. Hydraulic motor options: pressure relief valve, overcenter valve
6. Bearing: robust bearing system absorbing the forces exerted by the ring gear
7. Brake: hydraulically released parking brake
8. Others: NB600L Series wheel drives with manual disconnect application
9. Large radial and axial load capacity due to the use of strong tapered roller bearings.
10. Reliable oil seal protection, designed according to our field experience.
11. Universal and SAE input direct mounting flanges
12. The units are designed for their direct mounting into the wheel rims.
13. Technical data and installation dimension of EP600L Series gearbox are same as those of CZPT GFT…W Series and CZPT 600 Series, so these 3 can be used interchangeably.
 

Track drives Type

Max. torque N.m

Range of ratios (i)

Max. Input speed (rpm)

Braking torque (N.m)

EP601 L1A

1750

5.77

1000

450-600

EP603 L2A

4000

3000

210

EP603 L2B

4000

3000

210

EP602 L2

5000

12.4-25.8

3000

EP605 L2

7000

-53

3000

220-310

EP606 L2 L3

12000

-79

3000

300-800

EP607 L2 L3

17000

33-75-108

3000

300-600

EP609 L2 L3

23000

33-142

3000

300-600

EP610 L2 L3

30000

20-111

3000

300-800

EP611 L2 L3

36000

41-47

3000

300-800

EP613 L3

45000

108

3000

300-800

EP615 L3

60000

108

3000

300-1000

 

Related Products

 

Company Information

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Stepless
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

planetary gearbox

Concept of Coaxial and Parallel Shaft Arrangements in Planetary Gearboxes

In planetary gearboxes, the arrangement of shafts plays a crucial role in determining the gearbox’s overall structure and functionality. The two common shaft arrangements are coaxial and parallel configurations:

Coaxial Shaft Arrangement: In a coaxial arrangement, the input shaft and output shaft are positioned along the same axis, resulting in a compact and streamlined design. The planetary gears and other components are aligned concentrically around the central axis, allowing for efficient power transmission and reduced space requirements. Coaxial planetary gearboxes are commonly used in applications where space is limited, and a compact form factor is essential. They are often employed in robotics, automotive systems, and aerospace mechanisms.

Parallel Shaft Arrangement: In a parallel arrangement, the input and output shafts are positioned parallel to each other but on different axes. The planetary gears are aligned in a way that allows the power to be transmitted from the input shaft to the output shaft via a combination of meshing gears. This arrangement allows for a larger gear diameter and higher torque transmission capabilities. Parallel planetary gearboxes are often used in applications requiring high torque and heavy-duty performance, such as industrial machinery, construction equipment, and material handling systems.

The choice between coaxial and parallel shaft arrangements depends on the specific requirements of the application. Coaxial configurations are favored for compactness and efficient power transmission, while parallel configurations excel in handling higher torque and heavy loads. Both arrangements offer distinct advantages and are chosen based on factors like available space, torque demands, load characteristics, and overall system design.

planetary gearbox

Recent Advancements in Planetary Gearbox Technology

Advancements in planetary gearbox technology have led to improved performance, efficiency, and durability. Here are some notable developments:

High-Efficiency Gearing: Manufacturers are using advanced materials and precision manufacturing techniques to create gears with optimized tooth profiles. This reduces friction and enhances overall efficiency, resulting in higher power transmission with lower energy losses.

Enhanced Lubrication: Innovative lubrication systems and high-performance lubricants are being employed to ensure consistent and reliable lubrication even in extreme conditions. This helps to reduce wear and extend the lifespan of the gearbox.

Compact Designs: Engineers are focusing on designing more compact and lightweight planetary gearboxes without compromising their performance. This is particularly important for applications with limited space and weight constraints.

Integrated Sensors: Planetary gearboxes are now being equipped with sensors and monitoring systems that provide real-time data on temperature, vibration, and other operating parameters. This allows for predictive maintenance and early detection of potential issues.

Smart Gearboxes: Some modern planetary gearboxes are equipped with smart features such as remote monitoring, adaptive control, and data analysis. These features contribute to more efficient operation and better integration with automation systems.

Advanced Materials: The use of high-strength and wear-resistant materials, such as advanced alloys and composites, improves the durability and load-carrying capacity of planetary gearboxes. This is particularly beneficial for heavy-duty and high-torque applications.

Customization and Simulation: Advanced simulation and modeling tools enable engineers to design and optimize planetary gearboxes for specific applications. This customization helps achieve the desired performance and reliability levels.

Noise and Vibration Reduction: Innovations in gear design and manufacturing techniques have led to quieter and smoother-running planetary gearboxes, making them suitable for applications where noise and vibration are concerns.

Environmental Considerations: With growing environmental awareness, manufacturers are developing more eco-friendly lubricants and materials for planetary gearboxes, reducing their ecological footprint.

Overall, recent advancements in planetary gearbox technology are aimed at enhancing efficiency, durability, and versatility to meet the evolving demands of various industries and applications.

planetary gearbox

Common Applications and Industries of Planetary Gearboxes

Planetary gearboxes are widely utilized across various industries and applications due to their unique design and performance characteristics. Some common applications and industries where planetary gearboxes are commonly used include:

  • Automotive Industry: Planetary gearboxes are found in automatic transmissions, hybrid vehicle systems, and powertrains. They provide efficient torque conversion and variable gear ratios.
  • Robotics: Planetary gearboxes are used in robotic joints and manipulators, providing compact and high-torque solutions for precise movement.
  • Industrial Machinery: They are employed in conveyors, cranes, pumps, mixers, and various heavy-duty machinery where high torque and compact design are essential.
  • Aerospace: Aerospace applications include aircraft actuation systems, landing gear mechanisms, and satellite deployment mechanisms.
  • Material Handling: Planetary gearboxes are used in equipment like forklifts and pallet jacks to provide controlled movement and high lifting capabilities.
  • Renewable Energy: Wind turbines use planetary gearboxes to convert low-speed, high-torque rotational motion of the blades into higher-speed rotational motion for power generation.
  • Medical Devices: Planetary gearboxes find applications in medical imaging equipment, prosthetics, and surgical robots for precise and controlled motion.
  • Mining and Construction: Planetary gearboxes are used in heavy equipment like excavators, loaders, and bulldozers to handle heavy loads and provide controlled movement.
  • Marine Industry: They are employed in marine propulsion systems, winches, and steering mechanisms, benefiting from their compact design and high torque capabilities.

The versatility of planetary gearboxes makes them suitable for applications that require compact size, high torque density, and efficient power transmission. Their ability to handle varying torque loads, offer high gear ratios, and maintain consistent performance has led to their widespread adoption across numerous industries.

China Standard Wheel Drives Planetary Reducer Gear Box Gearboxes for Self-Propelled Vehicles   with Best Sales China Standard Wheel Drives Planetary Reducer Gear Box Gearboxes for Self-Propelled Vehicles   with Best Sales
editor by CX 2023-10-11

China OEM R K S F Series Speed Reducers Spiral Bevel Gear Reducer Bevel Gearboxes components of gearbox

Product Description

Model Number  F series Parallel Shaft Helical Gear Reducer Structure Type F FA FF FAF FAZ 
Assembly Method 1-6 Input power 0.18-200W
Enamelled Wire: 100% Copper Wire Reducer body Steel
Ratio 3.81-267.43 Brand FOX MOTOR

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery, paper machine
Hardness: Hardened Tooth Surface
Installation: Horizontal or Vertical
Samples:
US$ 99/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

bevel gearbox

Distinguishing Bevel Gearboxes from Other Gear Systems

Bevel gearboxes stand out from other types of gear systems due to their unique characteristics and applications:

  • Angle of Intersection: Bevel gearboxes are designed to transmit motion between intersecting shafts at specific angles, making them ideal for changing the direction of rotational motion.
  • Direction Change: Unlike parallel shaft gear systems, bevel gearboxes change the direction of motion by 90 degrees or other specified angles, allowing them to efficiently transmit power around corners.
  • Compact and Space-Saving: Bevel gearboxes are often compact and space-saving, making them suitable for applications with limited room for gear assembly.
  • Wide Range of Angles: Bevel gearboxes can handle various angle configurations beyond 90 degrees, providing flexibility in designing complex mechanical systems.
  • Specialized Applications: Bevel gearboxes are commonly used in applications requiring changes in direction, such as automotive differential systems, steering mechanisms, printing presses, and machinery with intersecting axes.

These distinguishing features make bevel gearboxes a versatile choice for scenarios where changing the direction of rotational motion or transmitting power between intersecting shafts is essential.

bevel gearbox

Limitations of Torque and Speed Handling in Bevel Gearboxes

While bevel gearboxes offer numerous advantages, they do have limitations in terms of the maximum torque and speed they can handle:

  • Torque Limitations: The torque capacity of a bevel gearbox is influenced by factors such as the size of the gears, the material used, and the tooth geometry. Excessive torque can lead to gear tooth failure, wear, or even breakage.
  • Speed Limitations: High-speed applications can pose challenges for bevel gearboxes. As rotational speed increases, the centrifugal forces acting on the gears also increase, leading to potential issues with stability, vibration, and heat generation.
  • Heat Dissipation: Bevel gearboxes may generate heat due to friction and the load-carrying nature of the gears. Prolonged operation at high speeds or under heavy loads can result in increased heat, which may require additional cooling mechanisms.
  • Material and Design: The material used for the gears and gearbox housing, as well as the design and manufacturing quality, play a significant role in determining the torque and speed limits of the gearbox. Inadequate material selection or poor design can result in premature failure.
  • Application-Specific Considerations: The limitations of bevel gearboxes may vary based on the specific application requirements, environmental conditions, and operational factors. It’s important to carefully assess the suitability of a bevel gearbox for a given task.

Engineers and designers need to carefully analyze the torque and speed requirements of an application to ensure that the selected bevel gearbox can operate safely and effectively within its specified limits.

bevel gearbox

Transmission of Motion at an Angle with Bevel Gearboxes

Bevel gearboxes are designed to transmit motion between intersecting shafts that are positioned at an angle to each other. They accomplish this by using a set of bevel gears, which have teeth that are cut in a conical shape.

When two bevel gears mesh, their teeth engage at the point of contact. As one gear rotates, it drives the other gear, transmitting motion and torque between the shafts. The angle between the shafts and the orientation of the gear teeth determine the direction and speed of motion transfer.

There are two main types of bevel gears commonly used in bevel gearboxes:

  • Straight Bevel Gears: These gears have straight-cut teeth and are used when the intersecting shafts are at a 90-degree angle. They are the simplest form of bevel gears and provide efficient motion transmission.
  • Spiral Bevel Gears: These gears have teeth that are cut at an angle, allowing them to gradually engage and disengage. Spiral bevel gears are used when the intersecting shafts are at angles other than 90 degrees. They provide smoother operation, less noise, and increased load-carrying capacity compared to straight bevel gears.

The precision manufacturing of bevel gear teeth ensures accurate and reliable motion transmission at various angles, making bevel gearboxes suitable for applications that require motion to be transferred between intersecting shafts in non-parallel orientations.

China OEM R K S F Series Speed Reducers Spiral Bevel Gear Reducer Bevel Gearboxes   components of gearbox	China OEM R K S F Series Speed Reducers Spiral Bevel Gear Reducer Bevel Gearboxes   components of gearbox
editor by CX 2023-09-25

China high quality 92% High Efficiency Kpm Kpb Spiral Bevel Hypoid Gearboxes gearbox engine

Product Description

Product Description

KPM-KPB series helical-hypoid gearboxes are the new-generation product with a compromise of advanced technology both at home and abroad.This product is widely used in textile, foodstuff, beverage,tobacco, logistics industrial fields,etc.
Main Features:
(1) Driven by hypoid gears, which has big ratios.
(2) Large output torque, high efficiency(up to 92%), energy saving and environmental protection.
(3) High quality aluminum alloy housing, light in weight and non-rusting.
(4) Smooth in running and low in noise, and can work long time in dreadful conditions.
(5) Good-looking appearance, durable service life and small volume.
(6) Suitable for all round installation, wide application and easy use.
(7) KPM series can replace NMRV worm gearbox; KPB series can replace CHINAMFG W series worm gearbox;
(8) Modular and multi-structure can meet the demands of various conditions.
 Main Material:
(1) Housing: aluminum alloy 
(2) Gear wheel: 20CrMnTiH1,carbonize & quencher heat treatment make the hardness of gears surface up to 56-62 HRC, retain carburization layers thickness between 0.3 and 0.5mm after precise grinding.

Detailed Photos

Product Parameters

Model Information:

GEARBOX SELECTING TABLES    
KPM50..           n1=1400r/min       160Nm    
                         
Model i i n2 M2max Fr2 63B5 71B5/B14 80B5/B14 90B5/B14    
nominal actual [r/min] [Nm] [N]    
3 Stage    
KPM50C   300 294.05 4.8 130  4100   N/A N/A N/A    
KPM50C   250 244.29 5.8 130  4100   N/A N/A N/A    
KPM50C   200 200.44 7.0  130  4100   N/A N/A N/A    
KPM50C   150 146.67 9.6 160  4000   N/A N/A N/A    
KPM50C   125 120.34 12 160  3770     N/A N/A    
KPM50C   100 101.04 14 160  3560     N/A N/A    
KPM50C   75 74.62 19 160  3220     N/A N/A    
KPM50C   60 62.36 23 160  3030     N/A N/A    
KPM50C   50 52.36 27 160  2860     N/A N/A    
2 Stage    
KPM50B   60 58.36 24 130  2960     N/A N/A    
KPM50B   50 48.86 29 130  2790       N/A    
KPM50B   40 40.09 35 130  2610       N/A    
KPM50B   30 29.33 48 160  2350       N/A    
KPM50B   25 24.07 59 160  2200            
KPM50B   20 20.21 70 160  2080            
KPM50B   15 14.92 94 160  1880            
KPM50B   12.5 12.47 113 160  1770            
KPM50B   10 10.47 134 160  1670            
KPM50B   7.5 7.73 182 160  1510            
                         
                         
KPM63..,KPB63..           n1=1400r/min       180Nm    
                         
Model i i n2 M2max Fr2 63B5 71B5/B14 80B5/B14 90B5/B14    
nominal actual [r/min] [Nm] [N]    
3 Stage    
KPM63C KPB63C 300 302.50  4.7 160  4800   N/A N/A N/A    
KPM63C KPB63C 250 243.57  5.8 160  4800   N/A N/A N/A    
KPM63C KPB63C 200 196.43  7.2  160  4800     N/A N/A    
KPM63C KPB63C 150 151.56  9.3 180  4650     N/A N/A    
KPM63C KPB63C 125 122.22  12 180  4330     N/A N/A    
KPM63C KPB63C 100 94.50  14 180  4070     N/A N/A    
KPM63C KPB63C 75 73.33  20 180  3650       N/A    
KPM63C KPB63C 60 63.33  23 180  3480       N/A    
KPM63C KPB63C 50 52.48  27 180  3270       N/A    
2 Stage    
KPM63B KPB63B 60 60.50  24 160  3430       N/A    
KPM63B KPB63B 50 48.71  29 160  3190            
KPM63B KPB63B 40 39.29  36 160  2970            
KPM63B KPB63B 30 30.31  47 180  2720            
KPM63B KPB63B 25 24.44  58 180  2530 N/A          
KPM63B KPB63B 20 18.90  70 180  2380 N/A          
KPM63B KPB63B 15 14.67  96 180  2130 N/A N/A        
KPM63B KPB63B 12.5 12.67  111 180  2030 N/A N/A        
KPM63B KPB63B 10 10.50  134 180  1910 N/A N/A        
KPM63B KPB63B 7.5 7.60  185 180  1710 N/A N/A        
                         
                         
KPM75..,KPB75..           n1=1400r/min           350Nm
                         
Model i i n2 M2max Fr2 63B5 71B5 80B5/B14 90B5/B14 100B5/B14 112B5/B14
nominal actual [r/min] [Nm] [N]
3 Stage
KPM75C KPB75C 300 297.21  4.8 300  6500     N/A N/A N/A N/A
KPM75C KPB75C 250 240.89  5.9 300  6500     N/A N/A N/A N/A
KPM75C KPB75C 200 200.66  7.0  300  6500     N/A N/A N/A N/A
KPM75C KPB75C 150 149.30  9.3 350  6500       N/A N/A N/A
KPM75C KPB75C 125 121.00  12 350  5980       N/A N/A N/A
KPM75C KPB75C 100 100.80  15 350  5520       N/A N/A N/A
KPM75C KPB75C 75 79.40  19 350  5040         N/A N/A
KPM75C KPB75C 60 62.43  23 350  4730 N/A       N/A N/A
KPM75C KPB75C 50 49.18  29 350  4370 N/A       N/A N/A
2 Stage
KPM75B KPB75B 60 59.44  24 300  4660 N/A       N/A N/A
KPM75B KPB75B 50 48.18  30 300  4340 N/A       N/A N/A
KPM75B KPB75B 40 40.13  35 300  4080 N/A         N/A
KPM75B KPB75B 30 29.86  47 350  3720 N/A N/A       N/A
KPM75B KPB75B 25 24.20  56 350  3500 N/A N/A        
KPM75B KPB75B 20 20.16  71 350  3230 N/A N/A        
KPM75B KPB75B 15 15.88  93 350  2950 N/A N/A        
KPM75B KPB75B 12.5 12.49  113 350  2770 N/A N/A N/A      
KPM75B KPB75B 10 9.84  143 350  2550 N/A N/A N/A      
KPM75B KPB75B 7.5 7.48  188 350  2330 N/A N/A N/A      
                         
                         
KPM90..,KPB86..           n1=1400r/min           500Nm
                         
Model i i n2 M2max Fr2 63B5 71B5 80B5/B14 90B5/B14 100B5/B14 112B5/B14
nominal actual [r/min] [Nm] [N]
3 Stage
KPM90C KPB86C 300 297.21  4.8 450  6500     N/A N/A N/A N/A
KPM90C KPB86C 250 240.89  5.9 450  6500       N/A N/A N/A
KPM90C KPB86C 200 200.66  7.0  450  6500       N/A N/A N/A
KPM90C KPB86C 150 151.20  9.3 500  6500       N/A N/A N/A
KPM90C KPB86C 125 125.95  12 500  5980       N/A N/A N/A
KPM90C KPB86C 100 99.22  15 500  5520 N/A       N/A N/A
KPM90C KPB86C 75 75.45  19 500  5040 N/A       N/A N/A
KPM90C KPB86C 60 62.43  23 500  4730 N/A       N/A N/A
KPM90C KPB86C 50 49.18  29 500  4370 N/A       N/A N/A
2 Stage
KPM90B KPB86B 60 59.44  24 450  5890 N/A         N/A
KPM90B KPB86B 50 48.18  30 450  5500 N/A         N/A
KPM90B KPB86B 40 40.13  35 450  5170 N/A N/A        
KPM90B KPB86B 30 30.24  47 500  4710 N/A N/A        
KPM90B KPB86B 25 25.19  56 500  4430 N/A N/A        
KPM90B KPB86B 20 19.84  71 500  4090 N/A N/A N/A      
KPM90B KPB86B 15 15.09  93 500  3730 N/A N/A N/A      
KPM90B KPB86B 12.5 12.49  113 500  3510 N/A N/A N/A      
KPM90B KPB86B 10 9.84  143 500  3240 N/A N/A N/A      
KPM90B KPB86B 7.5 7.48  188 500  2950 N/A N/A N/A      

Outline Dimension:

Company Profile

About our company:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.Our leading products is  full range of RV571-150 worm reducers , also supplied hypoid helical gearbox, PC units, UDL Variators and AC Motors.Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.

 Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia

Logistics

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other ServiceIncluding modeling selection guide, installation guide, and problem resolution guide, etc.

FAQ

1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

 

 

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Right-Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Two Stage-Three Stage
Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bevel gearbox

Distinguishing Bevel Gearboxes from Other Gear Systems

Bevel gearboxes stand out from other types of gear systems due to their unique characteristics and applications:

  • Angle of Intersection: Bevel gearboxes are designed to transmit motion between intersecting shafts at specific angles, making them ideal for changing the direction of rotational motion.
  • Direction Change: Unlike parallel shaft gear systems, bevel gearboxes change the direction of motion by 90 degrees or other specified angles, allowing them to efficiently transmit power around corners.
  • Compact and Space-Saving: Bevel gearboxes are often compact and space-saving, making them suitable for applications with limited room for gear assembly.
  • Wide Range of Angles: Bevel gearboxes can handle various angle configurations beyond 90 degrees, providing flexibility in designing complex mechanical systems.
  • Specialized Applications: Bevel gearboxes are commonly used in applications requiring changes in direction, such as automotive differential systems, steering mechanisms, printing presses, and machinery with intersecting axes.

These distinguishing features make bevel gearboxes a versatile choice for scenarios where changing the direction of rotational motion or transmitting power between intersecting shafts is essential.

bevel gearbox

Challenges of Using Bevel Gearboxes

While bevel gearboxes offer various benefits, there are certain challenges that can arise when using them:

  • Lubrication: Proper lubrication is essential to reduce friction, wear, and heat generation in bevel gearboxes. However, ensuring effective lubrication in the meshing bevel gears can be challenging due to their complex geometry and the potential for oil pooling or inadequate coverage.
  • Noise and Vibration: Bevel gearboxes can produce noise and vibration during operation, especially at higher speeds. The interaction of the gear teeth can lead to noise generation, which may require additional measures such as sound insulation or vibration dampening to mitigate.
  • Alignment: Precise alignment of the bevel gears is crucial to ensure smooth and efficient power transmission. Misalignment can lead to increased wear, reduced efficiency, and even gear tooth failure. Achieving proper alignment can be more complex in bevel gearboxes compared to other gearbox types.
  • Maintenance: Bevel gearboxes may require more frequent maintenance compared to other gear systems. Regular inspections, lubrication checks, and gear tooth profile monitoring are necessary to detect and address any issues before they escalate.
  • Space Constraints: The design of bevel gearboxes can be bulky, especially when used in applications that require a high gear ratio. This can pose challenges in situations where space is limited.
  • Heat Dissipation: High-speed or heavy-duty applications can generate significant heat in bevel gearboxes. Adequate heat dissipation mechanisms, such as cooling fins or lubrication cooling, may be required to prevent overheating and premature failure.

Engineers and manufacturers need to carefully address these challenges to ensure the reliable and effective use of bevel gearboxes in various applications.

bevel gearbox

Direction of Rotational Motion Change by Bevel Gears in a Bevel Gearbox

Bevel gears in a bevel gearbox are specifically designed to change the direction of rotational motion between intersecting shafts. They achieve this by utilizing the unique geometry of their tooth profiles, which allows them to transmit motion smoothly and efficiently even when the shafts are positioned at an angle other than 90 degrees.

When two bevel gears mesh together, their teeth engage and transfer rotational force from one gear to the other. Depending on the gear arrangement, the direction of rotation can be changed from input to output or vice versa. For example, in a straight bevel gear arrangement, the gears are set at a 90-degree angle, and the input and output shafts are perpendicular to each other. As the input gear rotates, it transfers its motion to the output gear, resulting in a change in the direction of rotation between the two shafts.

In more complex configurations, such as spiral bevel gears, the teeth are designed in a spiral pattern, which allows for smoother engagement and better load distribution. This makes them suitable for applications where higher torque and efficiency are required, and the shafts are positioned at angles other than 90 degrees.

In summary, bevel gears in a bevel gearbox are essential components that enable the transmission of rotational motion and power between intersecting shafts while changing the direction of rotation as needed for various mechanical systems and industrial applications.

China high quality 92% High Efficiency Kpm Kpb Spiral Bevel Hypoid Gearboxes   gearbox engineChina high quality 92% High Efficiency Kpm Kpb Spiral Bevel Hypoid Gearboxes   gearbox engine
editor by CX 2023-09-15

China Good quality K Type Helical Bevel Gear Speed Reducer Gearboxes gearbox adjustment

Product Description

K Type Helical Bevel Gear Speed Reducer Gearboxes. Helical gearbox series not only has higher transmission efficiency and loading capability than those of single-stage worm wheel transmission, but also reduces space. Moreover, under the close volume, the series can obtain higher transmission ratio and is more favorable for equipment setting. This product can be combined with various reducers to meet different requirements. S series with self-lock function
Energy Efficiency: Leveraging the advantages of high efficiency of helical gears and smooth transmission of worm gears, the reducer performs with outstanding stability and efficiency is above 90%
Loading Capacity: Available with power ranges from 0.12KW to 37KW, depending on different requirements and applications.
Installation Flexibility: All models are designed for a choice of mounting position M1-M6 specified by customers.

 

RICHMAN UNIVERSAL SOURCING CO LIMITED is located in HangZhou ZheJiang . With more than 20 years experience in gear transmission area, we have our owned factory and product lines. Worm reducer (WP series; RV series; VF series), screw jack reducer (WSH series) and helical gearbox (K,S,R,F series) are current mainly products. Strict and precision quality control procedure makes the final products meet demands of our customers.

We try to develop different markets, cooperate with kinds of customers, which can makes us keep moving forward, keep innovative and international vision. Richman Universal Sourcing is your best partner of transmission resolutions.

 

Application: Motor, Machinery
Function: Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step
Customization:
Available

|

Customized Request

bevel gearbox

Minimizing Backlash and Ensuring Efficient Power Transfer in Bevel Gearboxes

Bevel gearboxes are meticulously designed to minimize backlash and optimize power transfer efficiency, ensuring smooth and precise motion in mechanical systems.

Several design considerations contribute to minimizing backlash and enhancing power transfer:

  • Tooth Profile and Quality: High-precision tooth profiles with minimal clearance between mating gears reduce backlash. The use of advanced manufacturing techniques ensures consistent gear quality and accurate tooth engagement.
  • Preload and Contact Pattern: Properly applied preload and optimized contact patterns between the bevel gear teeth enhance meshing accuracy, reducing the potential for backlash and improving load distribution.
  • Gearbox Rigidity: Stiff and rigid gearbox housing and components help maintain precise gear alignment, reducing the effects of deflection and misalignment that can lead to backlash.
  • Bearing Selection: High-quality bearings with minimal play contribute to reduced backlash and smoother motion by minimizing axial and radial movement of the gears.
  • Lubrication: Adequate lubrication reduces friction, wear, and vibration, promoting efficient power transfer and minimizing backlash-related issues.
  • Tolerances and Manufacturing Precision: Tight manufacturing tolerances and precision machining processes ensure consistent gear geometry, alignment, and positioning, minimizing any potential sources of backlash.

By incorporating these design principles and practices, bevel gearboxes are engineered to achieve tight backlash control and efficient power transmission. This makes them suitable for applications where precise motion control, accuracy, and reliability are crucial, such as robotics, aerospace, automotive, and industrial machinery.

bevel gearbox

Bevel Gearboxes in Marine and Aerospace Applications

Yes, bevel gearboxes are commonly found in both marine and aerospace applications, offering unique advantages in these industries:

  • Marine Applications: Bevel gearboxes are used in marine propulsion systems to transmit power from engines to propellers. Their ability to change rotational direction and transmit high torque makes them suitable for adjusting propeller pitch and optimizing thrust. Additionally, bevel gearboxes are employed in winch systems, steering mechanisms, and various onboard equipment.
  • Aerospace Applications: Bevel gearboxes play a crucial role in aerospace systems, such as helicopter rotor systems. They transmit power from the engine to the rotor blades while allowing changes in rotational direction. In aircraft, bevel gearboxes are used in landing gear mechanisms, flap control systems, and engine accessory drives. The compact design of bevel gearboxes is especially beneficial in aerospace applications where space and weight considerations are essential.

The versatility, efficiency, and reliability of bevel gearboxes make them well-suited for addressing the unique challenges and requirements of marine and aerospace environments.

bevel gearbox

Types of Bevel Gearboxes and Their Classification

Bevel gearboxes come in various types, each designed for specific applications and requirements. They are classified based on factors such as gear arrangement, shaft orientation, and usage. Some common types of bevel gearboxes include:

  • Straight Bevel Gearboxes: These gearboxes use straight bevel gears and are suitable for transmitting motion between intersecting shafts at a 90-degree angle.
  • Spiral Bevel Gearboxes: These gearboxes use spiral bevel gears and are employed when the intersecting shafts are at angles other than 90 degrees. They offer smoother operation and higher load capacity.
  • Skew Bevel Gearboxes: In skew bevel gearboxes, the axes of the input and output shafts are not parallel or intersecting. These gearboxes are used in applications where non-parallel and non-intersecting shafts need to be connected.
  • Angular Bevel Gearboxes: Angular bevel gearboxes are designed to connect shafts at a specific angle, often used in applications where the required shaft angle is different from standard bevel gear configurations.

The classification of bevel gearboxes is based on the arrangement and orientation of the gear teeth and shafts. Manufacturers offer a variety of designs to accommodate different industrial needs and ensure efficient motion transmission at various angles.

China Good quality K Type Helical Bevel Gear Speed Reducer Gearboxes   gearbox adjustment	China Good quality K Type Helical Bevel Gear Speed Reducer Gearboxes   gearbox adjustment
editor by CX 2023-09-15

China Standard Bevel Right Angle Gear Reductor Gear Unit Angular Gearboxes differential gearbox

Product Description

Bevel Right Angle Gear Reductor 3 Shafts  Agricultural Gear Unit Angular Gearboxes 4 Shafts

Features:

1.Spiral bevel gear can rotate in both directions, transmit smoothly, low noise, large load abilities.
2.There are various axial directions, like single cross shaft, double cross shafts, single vertical shaft, double vertical shafts.
3.Wide application field: Food industry, Metal machining, Environmental protection of chemical industry, building industry and so on.

Product photo:

Specification:

Typical application machines:
Anual fertiliser distributor/Salt /sand Spreader
Conical fertiliser distributor/Salt Spreader
Double disc fertiliser distributor
Saw mills
Miny rotary tillers
Small rotary cultivator
Small round baller
Post Hole Digger

FAQ
Q: Can you make the gearbox with customization?
A: Yes, we can customize per your request, like flange, shaft, configuration, material, etc.

Q: Do you provide samples?
A: Yes. Sample is available for testing.

Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.

Q: What’s your lead time?
A: Standard product need 5-30days, a bit longer for customized products.

Q: Do you provide technology support?
A: Yes. Our company have design and development team, we can provide technology support if you
need.

Q: How to ship to us?
A: It is available by air, or by sea, or by train.

Q: How to pay the money?
A: T/T and L/C is preferred, with different currency, including USD, EUR, RMB, etc.

Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.

Q: How shall we contact you?
A: You can send inquiry directly, and we will respond within 24 hours.

 

Application: Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Right Angle
Gear Shape: Bevel Gear
Step: Single-Step
Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bevel gearbox

Performance of Bevel Gearboxes in Heavy-Duty Applications like Construction Equipment

Bevel gearboxes are well-suited for heavy-duty applications such as construction equipment due to their robust design and reliable performance:

  • Durability: Bevel gearboxes are designed to withstand high loads, shocks, and impacts commonly encountered in construction environments.
  • Torque Transmission: Construction equipment requires high torque to move heavy loads, and bevel gearboxes efficiently transmit torque between intersecting shafts.
  • Directional Changes: Bevel gearboxes enable smooth and precise changes in rotational direction, crucial for controlling construction machinery.
  • Power Distribution: These gearboxes ensure efficient power distribution to various components of construction equipment, enhancing overall functionality.
  • Steering Mechanisms: Many construction vehicles rely on bevel gearboxes for their steering systems, allowing operators to navigate equipment with ease.
  • Reliability: In demanding construction conditions, bevel gearboxes offer reliable and consistent performance, minimizing downtime and maintenance needs.

The ability of bevel gearboxes to handle heavy loads, transmit torque, and facilitate directional changes makes them indispensable components in construction equipment, contributing to the efficiency and effectiveness of various construction operations.

bevel gearbox

Limitations of Torque and Speed Handling in Bevel Gearboxes

While bevel gearboxes offer numerous advantages, they do have limitations in terms of the maximum torque and speed they can handle:

  • Torque Limitations: The torque capacity of a bevel gearbox is influenced by factors such as the size of the gears, the material used, and the tooth geometry. Excessive torque can lead to gear tooth failure, wear, or even breakage.
  • Speed Limitations: High-speed applications can pose challenges for bevel gearboxes. As rotational speed increases, the centrifugal forces acting on the gears also increase, leading to potential issues with stability, vibration, and heat generation.
  • Heat Dissipation: Bevel gearboxes may generate heat due to friction and the load-carrying nature of the gears. Prolonged operation at high speeds or under heavy loads can result in increased heat, which may require additional cooling mechanisms.
  • Material and Design: The material used for the gears and gearbox housing, as well as the design and manufacturing quality, play a significant role in determining the torque and speed limits of the gearbox. Inadequate material selection or poor design can result in premature failure.
  • Application-Specific Considerations: The limitations of bevel gearboxes may vary based on the specific application requirements, environmental conditions, and operational factors. It’s important to carefully assess the suitability of a bevel gearbox for a given task.

Engineers and designers need to carefully analyze the torque and speed requirements of an application to ensure that the selected bevel gearbox can operate safely and effectively within its specified limits.

bevel gearbox

Primary Applications of Bevel Gearboxes in Different Industries

Bevel gearboxes find widespread use across various industries due to their ability to change the direction of rotational motion and transmit torque efficiently. Some of the primary applications of bevel gearboxes in different industries include:

  • Automotive Industry: Bevel gearboxes are commonly used in automotive differentials to distribute torque between the wheels and allow for smooth cornering. They also play a crucial role in transferring power between the engine and the wheels.
  • Industrial Manufacturing: Bevel gearboxes are utilized in machine tools, such as milling machines and lathes, to transmit power and motion between different components. They are also found in conveyor systems and material handling equipment.
  • Construction and Heavy Equipment: Bevel gearboxes are integrated into construction equipment like cranes, bulldozers, and excavators to change the direction of motion and transfer torque for various operations.
  • Marine Industry: Bevel gearboxes are used in marine applications, such as ship propulsion systems and steering mechanisms, to redirect power and motion efficiently.
  • Power Generation: Bevel gearboxes are employed in power plants to transmit rotational motion and torque between different components of generators and turbines.
  • Aerospace Industry: Bevel gearboxes are used in aerospace applications for functions like adjusting the pitch of aircraft propellers and controlling the movement of landing gear.
  • Mining and Quarrying: Bevel gearboxes are used in mining machinery to transfer power and torque to conveyor belts, crushers, and other equipment.
  • Agricultural Machinery: Bevel gearboxes are found in agricultural equipment like tractors and harvesters to drive different components and attachments.

The versatile nature of bevel gearboxes makes them suitable for a wide range of industries where efficient torque transmission and directional changes are essential for optimal operation.

China Standard Bevel Right Angle Gear Reductor Gear Unit Angular Gearboxes   differential gearbox	China Standard Bevel Right Angle Gear Reductor Gear Unit Angular Gearboxes   differential gearbox
editor by CX 2023-09-12

China supplier Ara Series Different Ratio Helical Bevel Planetary Speed Reducer Gearboxes gearbox engine

Product Description

 

Product Description
ARA Series Different Ratio Helical Bevel Planetary Speed Reducer Gearboxes

 

Features:

ARA series of spiral bevel gearboxes characteristics: small , full installation , light weight, aluminum alloy shell, shaft
requires the use of corrosion-resistant steel when ordering . Lubricant has been added at the factory .

ARA Series modular steering box using scientific design, features significant transmission equipment industry is an indispensable
product . ARA series steering box excellent performance, light weight , small size, containing material ; rugged, high quality
aluminum alloy die casting ; appearance, reasonable design, reverse operation , input and output using multi-dimensional
structure, and the output diverse ways . For a wide range of torque, low noise , long life.
Technical parameters:
Power : 0.018KW ~ 4.94KW
Torque : 6.95 ~ 46.8Nm
Transmission ratio : 1:1, 2:1

* Ratio: 1:1,1.5:1 ,2:1 , 2.5:1 ,3:1 ,4:1 , 5:1
* Helical Gear Material: 20crmntih and 17crnimo6
* Shaft Material: 40cr Forged Steel
* Helical Gear Hardness: Hrc58-62
* Gear Housing: Cast Iron(Ht250 or Qt450)
* Weight: 2-488KG
* Product Features:

1, chassis: high rigidity cast iron FC-25;

2, gear: high-quality high-purity alloy quenched 50CrMnT processing by carburizing and grinding together;

3, the spindle: high quality alloy steel 40Cr quenched high purity processing, with hanging load capacity.

4, bearing: with a heavy load capacity tapered roller bearings;

5, Seal: imported oil seal lips, with a high dust and anti-spill.

 

 

Recommend products

 

Right Angle Worm Gear Box

Gear Reducers For Belt Conveyor

Speed Worm Gear Reducer

HangZhou CZPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

Due to our CZPT in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.

 

 

Professional Manufacture Agricultural Bevel China Gear Box For Machine

 

Our Gearbox has many items for your choosing and we can produce as per your drawing or sample to meet your special request
1. Large output torque
2. Safe, reliable, economical and durable
3. Stable transmission, quiet operation
4. High carrying ability
5. High modularization design, may equip with various outer power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type
6. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output very low rotary speed.
7. Form of installation: The position to be installed is not limited.
8. High strength, compact the box body of high strength cast iron, gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
9. Long life: Under the condition of correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life if main parts speed reducer(except wearing parts)should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
10. Low noise: Because main parts of speed reducer are processed, and tested critically, therefore the noise of speed reducer is low.
11.Our gear box have reached the advance international level, can replace the same kind of products imported.

Ratio

1:4          1:4.42

Power

70 Hp

Input Speed

540 rpm

Input Torque 

910 N.m

Usage

For Rice Harvester

Input

X

Recommend products

NMRV Series Transmission Gearboxes

 

 

MW High Torque Transmission Gearboxes

 

WPA WPS Cast Iron Case Worm Gearbox

 

Marine Gearbox For Work Boat

 

Gearbox Manufacturers For Agricultural Machine

 

90 Degree Reducer For Concrete Mixer

 

Worm Gearbox Reduction For Conveyor Mill Machine

 

Right Angle Worm Gear Box

 

Gear Reducers For Belt Conveyor

 

Speed Worm Gear Reducer

 

 

HangZhou CZPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

Due to our CZPT in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.

 

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
bevel gearbox

Bevel Gearboxes in Marine and Aerospace Applications

Yes, bevel gearboxes are commonly found in both marine and aerospace applications, offering unique advantages in these industries:

  • Marine Applications: Bevel gearboxes are used in marine propulsion systems to transmit power from engines to propellers. Their ability to change rotational direction and transmit high torque makes them suitable for adjusting propeller pitch and optimizing thrust. Additionally, bevel gearboxes are employed in winch systems, steering mechanisms, and various onboard equipment.
  • Aerospace Applications: Bevel gearboxes play a crucial role in aerospace systems, such as helicopter rotor systems. They transmit power from the engine to the rotor blades while allowing changes in rotational direction. In aircraft, bevel gearboxes are used in landing gear mechanisms, flap control systems, anbevel gearbox

    Performance of Bevel Gearboxes in Heavy-Duty Applications like Construction Equipment

    Bevel gearboxes are well-suited for heavy-duty applications such as construction equipment due to their robust design and reliable performance:

    • Durability: Bevel gearboxes are designed to withstand high loads, shocks, and impacts commonly encountered in construction environments.
    • Torque Transmission: Construction equipment requires high torque to move heavy loads, and bevel gearboxes efficiently transmit torque between intersecting shafts.
    • Directional Changes: Bevel gearboxes enable smooth and precise changes in rotational direction, crucial for controlling construction machinery.
    • Power Distribution: These gearboxes ensure efficient power distribution to various components of construction equipment, enhancing overall functionality.
    • Steering Mechanisms: Many construction vehicles rely on bevel gearboxes for their steering systems, allowing operators to navigate equipment with ease.
    • Reliability: In demanding construction conditions, bevel gearboxes offer reliable and consistent performance, minimizing downtime and maintenance needs.

    The ability of bevel gearboxes to handle heavy loads, transmit torque, and facilitate directional changes makes them indispensable components in construction equipment, contributing to the efficiency and effectiveness of various construction operations.

    d engine accessory drives. The compact design of bevel gearboxes is especially beneficial in aerospace applications where space and weight considerations are essential.

The versatility, efficiency, and reliability of bevel gearboxes make them well-suited for addressing the unique challenges and requirements of marine and aerospace environments.

Application: Transmission Parts
Certification: Reach
Input Speed: 1440rpm
Customization:
Available

|

Customized Request

bevel gearbox

Significance of the Angle Between Bevel Gears in a Bevel Gearbox

The angle between bevel gears in a bevel gearbox plays a crucial role in determining how the rotational motion is transmitted between the intersecting shafts. This angle, often referred to as the “shaft angle” or “pitch angle,” has significant implications for the performance, efficiency, and load-bearing capacity of the gearbox.

The angle between bevel gears affects several key aspects:

  • Mechanical Advantage: The angle determines the mechanical advantage or gear ratio of the bevel gearbox. A smaller angle results in a lower gear ratio, providing higher torque and slower rotational speed, while a larger angle yields a higher gear ratio, resulting in higher rotational speed and lower torque output.
  • Efficiency: The angle affects the efficiency of power transmission. A smaller angle generally leads to higher efficiency due to improved load distribution and reduced friction losses.
  • Load Distribution: Properly chosen angles contribute to even load distribution across the teeth of the bevel gears. Improper angles can cause uneven wear and premature failure.
  • Space Constraints: The angle impacts the overall dimensions of the bevel gearbox, which can be critical when space is limited in certain applications.

The angle between bevel gears is typically selected based on the specific requirements of the mechanical system and the intended application. It is a critical design consideration that engineers carefully analyze to ensure optimal performance and reliability of the bevel gearbox.

China supplier Ara Series Different Ratio Helical Bevel Planetary Speed Reducer Gearboxes   gearbox engineChina supplier Ara Series Different Ratio Helical Bevel Planetary Speed Reducer Gearboxes   gearbox engine
editor by CX 2023-08-31