Deep Water Well Drilling Rigs

Deep Water Well Drilling Rigs

deep h2o well drilling rigs
 

Primary functions:
C600CLCA truck mounted drilling rig is developed by our expert engineers with the entire world leading technology concept It is a kind of truck mounted and rotary drilling rig.
The truck chassis adopts the unique crane chassis of brand name CHAN’AN TRUCK and the main drive program, the transfer scenario, gearbox, double-winch device, mud pump, turntable, drilling tower, feed system are set up on the chassis.
This rig is a rotary drilling rig with directional circulation. It is geared up with WB850/4-80 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
The energy of drilling rig will come from the truck engine the rig has distribute put into action and hydraulic system.
We can set up the spare electric engine and clutch put into action according to client’s prerequisite, so that the rig can function with diesel engine or electrical motor.
We set up a generator (MF) which is handy to illuminate or operate at night time.
There are strain unit on the rig so it is high effectiveness when the rig drill on mud rock and on the weathering development.
The major travel of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer circumstance and mud pump clutch method are air operated.
According to client’s requirement, the rig can carry out down-the-gap hammer drilling with United states CZPT, Japan PDSKIOOS, Sweden CZPT, China CZPT, CZPTg can have out air lifting reverse circulation drilling with air-h2o faucet, double-wall drilling pipe, gas-h2o separator can carry out CZPT DTH hammer drilling rock breaking with WB850/4-80 mud pump can have out core-drilling with other particular drilling resource.
 
 
CZPT Parameter 
 

Drilling depth(M) 600
Drilling diameter(mm) five hundred
Speed of turntable(r/min) 1171026038221316(reverse)
Torque of turntable(KN.m) 5.4—-50
Single rope lifting capacity of main windlass(KN) fifty
Maximum lifting capacity of main windlass(KN) three hundred
Single rope lifting capacity of assistant windlass(KN) sixty
Maximum lifting capacity of assistant windlass(KN) 240
The lifting capacity of hook(KN) three hundred
Bearing capacity of drilling tower (KN) 300
The height of drilling tower (mm) 15000
Drill pipe Kelly bar(mm) 108×108×10500
Assistant pipe (mm) 89×10×9000
WB850/four-eighty Diameter of cylinder (mm) 106
plunger pump Stroke of piston (mm) one hundred fifty five
  Theoretical flow (L / min) 500    600 seven hundred 850
  Rated pressure (Mpa)   7     6   5   4
  Diameter of suction tube (mm) 106
  Diameter of drain pipe (mm) 64
  Input power (kw) eighty
Truck chassis CZPT form 8×6
Engine Product YC6A260-33YC water -cooled four strok diesel engine
Rated power(KW) 191
Speed(r/min) 2300
Size(L*W*H)(mm) 11510*2480*2800
CZPTtric generator Model MF
Rated power (kw) 15 / 30
Rated voltage(v) 380
Rated current(A) 27
Speed (r/min) 1500
Frequency(Hz) seventy five
The highest speed(Km/h) 75
Excess weight(kg) 27500

 
 
 

Connected CZPT

Business Profile

 

Glorytek CZPT (ZheJiang ) Co., Ltd. is an built-in corporation specialised in producing and exporting prime top quality drilling equipment and drilling elements for a lot more than 20 several years. We are supported and assisted by very skilled R&D staff and enginners that enable us to total all the assigned tasks effectively as for each clients’ needs.

Our factory addresses an location of 250,000 sq. meters, design area is about one hundred fifty,000 square meters, getting machining equipment, CNC processing center, friction welding machine, testing equipments etc. over two hundred sets and much more than 600 personnel.

Our items have been exported much more than sixty nations around the world, including Australia, Russia, Soutn Africa, Zimbabwe, Malaysia, Indonesia, South Korea, France, Sweden, United states, Canada, Haiti etc.

 

FAQ

Q: How can we decide on a ideal water well drill rig?
A: We normally advocate a ideal model according to drilling depth, drilling hole dia. and layer situation on site.
 

Q: Are you a manufacturing unit or a buying and selling business ?
A: We are an integrated corporation specialized in manufacturing and exporting.

Q: What is your payment terms?
A: We can take T/T,L/C.

Q:.What is your MOQ? How extended is the shipping time?
A: Our MOQ is 1 sets. Usually for drill rig, the shipping time is about 25-thirty days right after receiving payment, the drilling equipment would be about fifteen days.

Q:. How long is the guarantee?
A: The guarantee interval for mainframe is one 12 months (excluding the fast use parts).

Q: Can we print my Emblem on the goods?
A: Sure, we can. We help OEM .

Deep Water Well Drilling Rigs